Site icon PT SARANA ENERGI INVESTAMA

AMFE INDONESIA

amfe 1 - ELECTRICAL & INDUSTRIAL SUPPLIER - SYSTEM INTEGRATOR - SERVICE & MAINTENANCE SUBCONTRACTOR

The Automatic Miniature Fire Extinguisher AMFE

What is the AMFE?

The automatic miniature fire extinguisher AMFE is a fire-extinguishing fuse.

Quality-conscious manufacturers have been bringing safe products onto the market for years. The causes that can lead to a technical defect and possibly a fire can never be ruled out 100%.

Around every third fire occurs due to electricity, and many continue to occur in electrical appliances. The AMFE can be built directly into the electronics by manufacturers and protects you from damage when it would otherwise be too late.

If there should be a technical defect in an electrical device, the AMFE can detect the fire, extinguish it and prevent it from reigniting. And it gets even better: Thanks to our special solution multialert®, an unlimited number of AMFEs can be networked and triggered remotely at the same time – for your maximum security.

AMFE offers fire protection for your control cabinet, electrical cabinet and electrical systems!

*applies to the e-bulb

 

Your benefits at a glance

Automatic Fire Protection Automatic Fire Extinguishing Connectable with multialert®
Retrofittable No use of CO2 Economical Solutions

THE FUNCTION

Our automatic miniature fire extinguisher AMFE effectively protects your devices, machines and systems in industry, trade, trade and in the household against fire. It detects and extinguishes the fire in a closed housing and thus prevents it from spreading without the need of human intervention.

During a fire scenario, the heat creates a higher pressure on the ampoule. When the predetermined trigger temperature is reached, the ampoule bursts, activating a patented mechanism that pumps the extinguishing fluid out of the cylinder. The extinguishing fluid leaves the cylinder through holes in the AMFE body and reaches the fire at an early stage. The damage can be limited. Thanks to the quick and effective course of the extinguishing process, the fire is prevented from spreading further.

 

Not uncommon: a fire in an electrical device.

Solution: The AMFE reliably extinguishes the fire.

Technical Specifications

The required amount of extinguishing fluid must be calculated taking into account the guidelines relevant to

your application (e.g. NFPA 12, NFPA 2001, VdS 2093, EN 15004).

 With or without feedback contact

 Dimensions of the release unit: 16 mm x 64 mm

 Minimum installation depth: 25 mm

 Activation temperature: 68 ° C – 93 ° C (others on request)

 Extinguishing fluid: 3MTM NOVECTM Engineered Fluid

 Easy to maintain

 Shelf life of trigger mechanism: 15 years (see manual for details)

A variety of applications that is convincing.

Control Cabinets Automotive Train Electronical Devices Valuable Collections

SIMULTANEOUS TRIGGERING OF MULTIPLE AMFEs THROUGH OUR SPECIAL SOLUTION multialert®

 

The multialert® fire protection solution protects clearly defined areas such as control cabinet lines through:

 Fast detection of smoldering fires and smoke development

 Direct triggering and deletion in the entire area

 Alerting through audiovisual signals

✔ Forwarding of the report to higher-level systems

 

IN 4 STEPS TO ALL-ROUND PROTECTION

STEP 1: AMFE INSTALLATION STEP 2: multialert® INSTALLATION

By installing the AMFE, you are protected by a patented trigger mechanism. According to the thermodynamic principle, the thermo bulb triggers the AMFE at a predetermined trigger temperature. Without any additional wiring or external power supply!

In step 2, the AMFE can be expanded to include the optional multialert®.

The multialert® offers you the following benefits:

  • Simultaneous triggering of several AMFEs
  • Forwarding to higher-level systems, such as fire alarm control panels
  • Audiovisual signaling via warning horn and RGB rotating beacon
  • Shutdown of fans and main protectors
  • External triggering of the AMFE via various systems and detection options, see steps 3 + 4

STEP 3: CONNECTING ADDITIONAL FIRE DETECTORS STEP 4: ACTIVATION AND EXTINGUISHING
Selection and installation of the desired fire detection systems, e.g .:

Camera systems
Smoke alarms, CO alarms, gas alarms, etc.
Temperature measurements
The only requirement: a potential-free switching output

Triggering and deletion by:

the installed detection types
the AMFE itself
external extinguishing signal from higher-level BMZ, etc.

Signaling by:

Audiovisual signals – warning tone and flashing light
Forwarding of signals to higher-level BMZ, fire brigade

THE SOLUTION: THE SMALLEST FIRE EXTINGUISHER OF THE WORLD

 

 

 

That’s what our clients say:

“If a fire broke out in our logistics center, we would not only have the problem that our systems would be over, but also our customers’ goods, which are packed and shipped by us. The AMFE protects us against the risk of fire in the switchgear in a device-integrated way and also protects the delivery of your packages.”

FRED LABOSCH

Logistics Manager
Amazon Services GmbH

“To protect our production facilities, we installed the AMFE in all of our control cabinets and switchgear. In this way we can prevent costly production losses and system downtimes caused by fire. This gives us production security. “

RUVEN CANO

Technical Manager
ABS Coatings GmbH

DO YOU HAVE QUESTION ?? CONTACT US

OUR AMFE SUCCESS STORIES

WE ARE THERE, BEFORE YOU GET BURNT OUT

As the largest European manufacturer of wood-cased pencils, erasers and modeling clay, as well as the world market leader for industrial plasticine, the issue of safety is no small minor matter for Staedtler Mars GmbH & Co. KG. With over 80 control cabinets in the logistics center in Nürnberg (Germany), a fire protection solution is required that is networked, works simultaneously and absolutely reliably. With our automatic mini fire extinguisher AMFE and the associated special solution for simultaneous triggering multialert®, we were able to provide Staedtler with a high-quality solution and ready-to-use installation in the shortest possible time – and without any business interruption!

 

Indonesia Meister’s Authorized Distributor Factory :
PT SARANA ENERGI INVESTAMA

Green Sedayu Bizpark Cakung , GS 9A No 21 , Cakung Timur

MEISTER STRÖMUNGSTECHNIK GMBH
IM GEWERBEGEBIET 2
D-63831 WIESEN

 

DOWNLOADS

AMFE Flyer 2021 Success Story STAEDTLER Special Report in the ifp
DOWNLOAD DOWNLOAD DOWNLOAD
UL PROCESSED WIRE UL WIRING HARNESS UL CERTIFICATE 508A CSA

Related posts:

Exit mobile version