HVACR Engineering Service · Indonesia
HVAC Installation & Maintenance Service
Commercial · Industrial · Cleanroom · Critical Facility
PartnerHVACR, bagian dari SEI Group, menyediakan layanan
engineering, installation, retrofit, preventive maintenance, hingga
energy optimization untuk sistem HVACR di Indonesia — chiller, AHU, FCU, VRV/VRF,
cleanroom, dan industrial ventilation dengan standar ASHRAE & SNI.
- 24/7Technical Support
- ASHRAE 90.1Energy Compliance
- R-32 · R-410ARefrigerant Certified
- ISO 14644Cleanroom Standard
Solusi HVACR untuk Industri & Building Modern Indonesia
Sistem HVAC memiliki peran 30–50% dari total energy consumption di
commercial building dan critical facility. Pemilihan, instalasi, dan maintenance yang
tepat menentukan reliability operasional, kenyamanan thermal, kualitas udara, dan
cost-of-ownership 15-25 tahun ke depan.
PartnerHVACR menghadirkan solusi engineering untuk commercial,
manufacturing, healthcare, data center, food & beverage, hingga cleanroom — dengan
fokus pada energy efficiency dan refrigerant transition ke low-GWP
(R-32, R-1234yf) sesuai roadmap Kigali Amendment Indonesia.
Business Outcome yang Kami Targetkan
- Reduksi HVAC energy consumption 15–25% via right-sizing & controls
- Extended equipment lifecycle 5–10 tahun melalui predictive maintenance
- Compliance ASHRAE 62.1 (IAQ) & 90.1 (energy)
- Low-GWP refrigerant transition (R-410A → R-32 → R-1234yf)
- Cleanroom certification untuk healthcare & manufacturing
- BMS integration siap untuk smart building & ESG reporting
4 Tingkat HVAC Service — Engineering, PM, Predictive, Energy
Pendekatan tiered untuk lifecycle HVAC — dari design baru hingga optimization energy
pada sistem existing.
Installation & Engineering
Design dan instalasi sistem HVAC baru sesuai cooling load analysis.
- HVAC system design & cooling load calculation (CLTD/CLF)
- Chiller, AHU, FCU, VRV/VRF system installation
- Ducting fabrication (galvanized / pre-insulated) & installation
- Ventilation & exhaust system (kitchen, lab, industrial)
- Fresh air supply & air balancing (per ASHRAE 62.1)
- BMS integration (BACnet, Modbus, KNX)
- Refrigerant piping & pressure testing
- Testing, adjusting & balancing (TAB) & commissioning
Preventive Maintenance
Inspeksi rutin terjadwal untuk maintain reliability & efficiency.
- Periodic inspection (monthly / quarterly / annual)
- Air filter cleaning & replacement (MERV, HEPA)
- Chiller maintenance — tube cleaning, oil change
- Refrigerant level checking & top-up (R-410A, R-32, R-134a)
- Coil cleaning (evaporator, condenser)
- Belt, bearing, motor inspection
- Airflow & temperature differential checking
- Maintenance log & condition reporting
Predictive Maintenance
Data-driven analytics untuk catch fault sebelum equipment failure.
- IR thermography — compressor, motor, electrical panel HVAC
- Vibration analysis — chiller, fan, pump rotating equipment
- Refrigerant analysis (acid, moisture, particulates)
- Oil analysis untuk chiller compressor
- Power quality monitoring untuk VFD & motor
- Performance trending vs design baseline
- Early fault alerting & root-cause analysis
Energy Optimization
Audit, retrofit, dan controls upgrade untuk reduksi consumption.
- ASHRAE Energy Audit Level 1, 2, 3
- VFD retrofit untuk chiller, pump, fan
- Free cooling & water-side economizer
- Chiller plant sequencing optimization
- Demand-controlled ventilation (DCV via CO₂ sensor)
- Refrigerant transition ke low-GWP (R-32, R-1234yf)
- BMS schedule & setpoint tuning
- Energy ROI projection & M&V reporting (IPMVP)
Butuh cooling load analysis atau energy audit untuk facility Anda?
4 Kategori Solusi HVAC — Sesuai Tipe Facility
Sistem HVAC dipilih berdasarkan cooling capacity requirement, building type, dan
criticality. Berikut framework yang kami pakai untuk recommendation.
Office Tower & Retail
Chiller water-cooled + AHU/FCU untuk gedung high-rise. VRV/VRF system untuk mid-rise office. Ducted split untuk shop / restaurant.
- Capacity 50–2000 TR
- BMS-integrated controls
- Demand-controlled ventilation
Manufacturing & Warehouse
Industrial chiller, evaporative cooling, large-volume exhaust, fume hood, dust collection, dan process cooling untuk pabrik.
- Capacity hingga 5000 TR
- Heat recovery system
- Process cooling water
Healthcare · Lab · Electronics
Controlled environment ISO 14644 Class 5–8. HEPA/ULPA filtration, laminar flow, positive/negative pressure, USP 797/800 untuk pharma.
- ISO 5–8 cleanroom
- HEPA H13/H14 & ULPA U15
- Pressure differential control
Data Center & Healthcare
Precision cooling (CRAC/CRAH), N+1 redundancy, hot/cold aisle containment untuk data center. Critical OR & ICU HVAC untuk hospital.
- N+1 / 2N redundancy
- Hot/cold aisle containment
- Mission-critical 99.99% uptime
International Standards & Tier-1 OEM Equipment
Engineering mengacu pada standar ASHRAE, ISO, dan SNI. Equipment dari authorized OEMs
dengan factory warranty & parts availability di Indonesia.
Standards Compliance
Equipment OEM Partners
Cocok untuk 6 Sektor dengan Critical HVAC Requirement
Pabrik FMCG, automotive, tekstil, electronics. Process cooling, ventilation, dust collection.
Office tower, mall, mixed-use. Chiller plant, BMS-integrated VRF, energy optimization.
Hospital OR/ICU, vaccine cold storage, isolation room dengan pressure control.
Tier-III/IV precision cooling, CRAC/CRAH, hot/cold aisle, N+1 redundancy.
Cold room, blast freezer, process area cooling, HACCP-compliant ventilation.
Pharma, electronics, biotech — ISO 14644 Class 5-8, GMP, USP 797/800.
4 Diferensiasi Engineering PartnerHVACR
Certified Engineers
Tim engineering bersertifikat ASHRAE, refrigerant handling (BSDR Indonesia), AK3 K3.
Energy Efficiency Focus
Audit ASHRAE Level 1-3, VFD retrofit, low-GWP refrigerant transition, free cooling implementation.
Predictive Maintenance
IR thermography, vibration analysis, oil analysis untuk catch failure sebelum unplanned downtime.
Local Support 24/7
Emergency response 24/7, spare parts di Indonesia, SLA cepat untuk Jabodetabek & nasional.
Pertanyaan Umum HVAC Engineering & Maintenance
Berapa biaya HVAC installation untuk gedung commercial?
Indicative range: Rp 15–25 juta per TR (Ton Refrigeration) untuk water-cooled chiller plant complete (chiller, cooling tower, AHU, distribution piping). VRV/VRF system Rp 12–18 juta per HP indoor unit. Cleanroom HVAC tipikal 2-3× lebih mahal karena HEPA, controls, dan stringent commissioning.
VRV/VRF vs Chiller — mana yang cocok untuk facility saya?
VRV/VRF cocok untuk ≤500 TR, multi-zone office, retail, dan mid-rise residential — installation flexibel, individual zone control. Chiller (water-cooled) cocok untuk ≥300 TR, high-rise, industrial, dan critical facility — lebih efficient at scale (kW/TR rendah), tapi butuh mechanical room dan cooling tower.
Berapa frekuensi preventive maintenance HVAC?
Standar industri: monthly inspection untuk critical facility (data center, hospital), quarterly untuk commercial building, annual major service untuk chiller (tube cleaning, oil change). Filter change quarterly atau berdasarkan pressure drop measurement.
Apa beda refrigerant R-410A, R-32, dan R-1234yf?
R-410A — refrigerant mainstream sekarang, GWP ~2088 (tinggi). R-32 — replacement R-410A, GWP ~675 (lebih rendah), recommended untuk new install. R-1234yf — ultra-low GWP <1, future-proof tapi cost premium. Indonesia mengikuti Kigali Amendment phase-down HFC mulai 2024.
Cleanroom class apa yang Anda support?
ISO 14644 Class 5 (Grade A) hingga Class 8 (Grade D). Common applications: Class 5/6 untuk vaccine fill-finish, electronics assembly. Class 7 untuk pharma compounding (USP 797/800). Class 8 untuk medical device manufacturing. Termasuk laminar flow hood, biosafety cabinet, pass-through chamber.
Apa itu ASHRAE Energy Audit Level 1, 2, 3?
Level 1 — Walk-Through: assessment cepat, identify low-cost ECM (Energy Conservation Measures). Level 2 — Detailed Survey: data logging, calculation savings per measure, financial analysis. Level 3 — Investment-Grade Audit: full engineering analysis dengan simulation, suitable untuk financing & performance contracting.
Bisa retrofit chiller existing tanpa replace?
Ya. Common retrofit yang kami lakukan: VFD retrofit untuk chiller compressor & pump (15-30% energy savings), controls upgrade dari pneumatic ke DDC, refrigerant retrofit (R-22 → R-407C atau R-410A), heat recovery tambahan, dan chiller plant sequencing optimization. ROI tipikal 2-5 tahun.
Lokasi support PartnerHVACR di Indonesia?
HQ engineering & service di Jakarta, dengan project track record di Jabodetabek, Bandung, Surabaya, Medan, Makassar, dan Bali. SLA tipikal: Jabodetabek 4-8 jam on-site arrival, luar Jabodetabek 24-72 jam. Spare parts critical di-stock di warehouse Jakarta.
Konsultasikan Kebutuhan HVAC Facility Anda
Dapatkan cooling load analysis, energy audit, dan
HVAC system proposal sesuai tipe facility, capacity requirement, dan
budget operasional perusahaan Anda.
Kunjungi PartnerHVACR.id
www.partnerhvacr.id
